News
New analog module C-IT-0504L for CIB bus
10.12.2025 | Category: EN |
Teco a.s. is launching the new C-IT-0504L module, which offers identical functionality to the already proven C-IT-0504S model - but in a design for mounting on a DIN rail, 2 M wide, with screw terminals.Technical parameters
Inputs: The module provides two configurable input groups – group 1 with 4 AI/DI inputs and group 2 with 1 AI/DI input.
Analog inputs support temperature sensor measurements (Pt1000, Ni1000, NTC12k, KTY81-121) in a wide range and also a general resistance input 0 ÷ 160 kΩ with the possibility of linearization in the user program.
Binary inputs allow the connection of a free potential-free contact against the common GND wire, or balanced input mode.
Outputs: Four analog outputs (AO1–AO4) supply voltage in the range 0 ÷ 10 V. The output range can be set in software up to 130% of the nominal value. The recommended load is higher than 1 kΩ; the maximum allowed load capacitance is 250 nF.
Design and use
The new C-IT-0504L design is highly suitable for installation in control cabinets thanks to its standard 2M width and DIN rail mounting. It enables the integration of analog and binary signals directly into the CIB bus without the need for separate converters or complex expansion modules.
Thanks to identical electrical and functional parameters as the miniature version C-IT-0504S, users are assured of compatibility, easy replacement or expansion of existing installations.
More information and technical documents are available here:
TecoWiki: C-IT-0504L
Catalog: C-IT-0504L